Automatic Door Systems

In short

Automatic sliding, swing and telescopic door operators supplied, installed and commissioned. We are an approved Assa Abloy and record installer and a member of the Automatic Door Installation Association, and every door is handed over commissioned to EN 16005.

Systems we use

We are an approved fabricator and installer for the systems below, which means the profiles are specified, made and finished by the same company that puts them in.

  • Assa Abloy SL500
  • Assa Abloy SW100
  • Assa Abloy SW200
  • Assa Abloy SW300
  • record DSTA 20
  • record DFA 127
  • PSL 100
  • PSL 150
  • PSL 150-T
  • PSW 250

What the job involves

Specify the right operator

Traffic, door mass and the opening decide the operator, not the other way round.

Install

Operator, track and leaves installed with the sensors set out to suit the approach.

Commission to EN 16005

Safety sensors proved and force tested, because a powered door is machinery.

Hand over the paperwork

You get the commissioning record the building needs at handover.

Put it on a schedule

Powered doors are maintained twice a year under the regulations, so we book the visits before we leave.

Recent automatic doors work

Valor Park, Enfield Valor Park, EnfieldContractor: Glencar Construction Troubadour Greenwich Peninsula Theatre Troubadour Greenwich Peninsula Theatre Safestore Self Storage, Shoreham Safestore Self Storage, Shoreham Storex Self Storage, Brentford Storex Self Storage, BrentfordContractor: Modus Construction Management Bridge House, Ashford Bridge House, AshfordContractor: Faircloth Construction Ltd Bethnal Green Railway Arches Bethnal Green Railway ArchesContractor: KN Networks

Automatic doors near you

Our factory is on Canvey Island and our engineers are based across the UK. These are the areas we work in most.

Canvey IslandBasildonSouthend-on-SeaChelmsfordBrentwoodGrays and ThurrockColchesterLondonEast London and DocklandsRomford and HaveringDartford and North KentCroydon and South LondonHertfordshireKentSuffolk

Frequently asked questions

Do you work directly for main contractors?

Yes. Most of our work is a subcontract package for a main contractor, set out from the architect's drawings and delivered to the site programme. We also work directly for building owners and occupiers, particularly on servicing and replacement work.

See the project record

Do you make the aluminium yourselves or buy it in?

We make it. We have a 10,000 sq ft factory with our own drawing office and our own powder coating paintline, so profiles are cut, fabricated and finished in house. That is what lets us respond when a specification changes part way through a job.

More about the factory

Which aluminium systems do you fabricate?

We are an approved fabricator for Comar and for Senior Architectural Systems. In practice that means Comar 6 and 6 EFT curtain walling, Comar 5Pi and 9Pi windows, Comar 7 and 7Pi doors, Comar 1, 3, 9 and 13 shopfront framing, and the Senior SF52, SCW, SPW 600 and Ali Vu ranges.

Browse the systems

Which automatic door operators do you install?

We are an approved Assa Abloy and record installer. That covers the Assa Abloy SL500 sliding operator, the SW100, SW200 and SW300 swing operators, and the record DSTA 20 and DFA 127, along with the PSL and PSW ranges.

Automatic door systems

How often does an automatic door need servicing?

Twice a year. Automatic doors fall under the machinery regulations, and to conform to EN 16005 they should be maintained twice annually. Our service team provides six monthly visits planned in advance so the building is not caught out.

Servicing and repair

Our other products and services

Curtain wallingWindows and doorsServicing and repairRoller shuttersSteel doorsLouvres and screensShopfronts and canopies

Got a package to price

Send the drawings or a schedule and you will get a straight answer on cost and lead time.

Send us your drawings 01277 812472